Impreza header
Awesome job.was perfect
¿Tienes una cuenta?
Inicia sesión para finalizar tus compras con mayor rapidez.
$0.00 USD
SKU:01-0608
Enhance your 2011+ Subaru Impreza 2.0i or Limited Edition N/A's performance with Tsudo Stainless 4-1 Race Unequal Length Headers. With a True 4-1 UEL design, not only do they boost mid-range power, but they also bring out that signature Subaru boxer engine rumble. Upgrade your Subaru experience today!
NOTE: This product is intended for off-road use only and cannot be shipped to non-CARB-compliant states like Cali and NY. Check your local laws regarding exhaust system modifications, as many states have stricter regulations to meet SMOG requirements
Not satisfied with your purchase? No problem! Return it within 30 days for a full refund, as long as it’s in brand new condition with the original packaging. Used or damaged items will have a discounted refund. Buyers are responsible for return shipping costs or can use our convenient 20% label fee option.
Awesome job.was perfect
Great people to work with fast and they keep communicating regardless of issue or not
It’s just a little to tight to put on besides install it’s 100%
Ok so let me start off my review saying the customer service is top notch here at SE motors. I noted in my purchase notes that I heard about the other 2 customers that had purchased these headers and complained about the flex hose leaking. Knowing this was an issue they now are coming with straight pipe 304 stainless steel where the flex hose used to be. No leaks on my MY 14 2.0 Base Impreza with the SP2 exhaust system is sounds very nice and looks very sleek. Definitely adds some HP but without a pro tune or without tuning it myself using my OpenPort2.0 I cannot truly say how much it is. If I had to guess I'd say over 10hp due to it being a nice set of headers. Your car will run rich afr wise with both these installed so I'd highly recommend a tune to maximize the gains. I'll be shopping here in the future for exhaust systems. Serious bang for your buck!
Ok so let me start off my review saying the customer service is top notch here at SE motors. I noted in my purchase notes that I heard about the other 2 customers that had purchased these headers and complained about the flex hose leaking. Knowing this was an issue they now are coming with straight pipe 304 stainless steel where the flex hose used to be. No leaks on my MY 14 2.0 Base Impreza with the SP2 exhaust system is sounds very nice and looks very sleek. Definitely adds some HP but without a pro tune or without tuning it myself using my OpenPort2.0 I cannot truly say how much it is. If I had to guess I'd say over 10hp due to it being a nice set of headers. Your car will run rich afr wise with both these installed so I'd highly recommend a tune to maximize the gains. I'll be shopping here in the future for exhaust systems. Serious bang for your buck!
Headers fit my 2015 Crosstrek perfectly. Only problem is that the flex pipe in the headers leak BADLY. I had really loud whistling and exhaust fumes in the car. I had to take them to a welder to get the flex pipe cut out and straight pipe welded in. If you buy these, expect to have to fix them before putting them on your car.
Headers fit my 2015 Crosstrek perfectly. Only problem is that the flex pipe in the headers leak BADLY. I had really loud whistling and exhaust fumes in the car. I had to take them to a welder to get the flex pipe cut out and straight pipe welded in. If you buy these, expect to have to fix them before putting them on your car.
The header in the photo and title of the sales page makes you think that it's a 4-2-1 Equal Length Header. The header I received was not. The header I received was a 4-1 Unequal Length. I guess this will do, I just won't make the most horsepower. Plus the header on the photo does not show any flex piping. The one I got did. Steel braided flex piping is a hit or miss on headers in regards to small leaks. Fitment: The header fit perfectly without any issues. Spot on measurements!!! I bought stock gaskets and I'm glad I did. The Tsudo gaskets were actually really small to the point of the exhaust ports of the gasket were smaller than the exhaust hole on the flange. Sound and Performance: UEL Headers on Subaru's just sound really awesome!! Unfortunately, I have a whistle/hissing sound under load. I retightened all the exhaust bolts and header nuts and that didn't fix the sound. I took it for a 45-minute test drive and checked the header again. I could not see any carbon marks and again the bolts were all tight. I believe it's the flex piping they put on the long runners of the header. Can't say enough how much I hate steel braided flex piping on headers. I now need spend more money to get those replaced.
Before end of the 2024
Hoping to get more in the winter. We will be making more of these for a long time. We just do in batch process so they come in by 30 every other shipment.
Might find on youtube. We never got any sent in.
No, it is not.
No, they are different motors. You have EJ20 while this is for the new FB20 motors. Sorry, I would research to see if any of the EJ25 headers work.
We are hoping Late August As of now.
Impreza = crosstrek. For headers most of time you just have to make sure it matches to the right motor. Which is fb20.
No. only fit up to 2016 model
No, I think they changed the motor a bit for the hybrid model.
Only tested on 2.0i version. Unfortunately, we can't guarantee the fitment, You might need to modify to fit 2.5i model.
We are attempting. More info through out the year.
Straight pipe is discontinued. The latest version headers using new improve double wall flex which eliminates previous gen issues.
Comes with a full hardware kit.
We highly recommend it for better results. Since you guys are naturally aspirated; you are able to run without a tune, but I do not recommend aggressive driving. Watch your gauges if you do ;)
Send us message of what car you have (Year and sub-model) and we will figure it out for you.
Depends where you are located. Tunes all differ by tuner. I would check your local forums or groups for that answer.
Yes, but comes with a cel fix to help with it. Might need 1-3 resets to start working sometimes.
Please send us a direct message or email with order number please.
No these will not fit Imprezas with the 2.5 n/a engines. These headers are for the 2011 and up Imprezas with the FB20 engine. Which is a 2.0 liter n/a engine.
I have the v2 flex pipe, Iâ€:tm:ve had them for well over a year and I can tell you that they do not leak.
Only fits impreza 2011up 2.0 motor
Yes it does.
we do not carry the straight pipe. we were only doing that to the version one. these are version 2s and they do not have that issue. So no reason to make the straight pipe version anymore.
Receive exclusive offers and promo codes